BMNTB - P-22 EXTRA HEAVY DUTY S/P/C

  • MSDS: BMNTB
  • Manufacturer: ABC COMPOUNDING CO INC
  • Product Name: P-22 EXTRA HEAVY DUTY S/P/C
  • National Stock Number: 7930-00N023032
Product Identification

Product ID:P-22 EXTRA HEAVY DUTY S/P/C
MSDS Date:02/01/1989
FSC:7930
NIIN:00N023032
MSDS Number: BMNTB

Responsible Party
ABC COMPOUNDING CO INC
6970 JONESBORO RD
MORROW, GA 30260
US

Emergency Phone: 404-968-3630

Info Phone: 404-968-3630

Cage: HO510

Contractor
ABC COMPOUNDING INC
585 MORROW, GA 30260 US

Telephone: 800-535-5053

Cage: HO510

Ingredients

SILICA ACID (H2SIO3), DISODIUM SALT; (SODIUM METASILICATE)

CAS: 6834-92-0

RTECS: VV9275000

OSHA PEL 2 MG/M3 (MFR)

ACGIH TLV: 2 MG/M3 (MFR)


SODIUM HYDROXIDE

CAS: 1310-73-2

RTECS: WB4900000

OSHA PEL 2 MG/M3

ACGIH TLV: C 2 MG/M3; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEVERITY OF INJURY DEPENDS LARGELY ON
PRODUCT CONCENTRATION AND DURATION OF EXPOSURE. IMMEDIATE ACTION IS
NECESSARY TO LIMIT SEVERITY OF INJURY. CAN CAUSE MINOR IRRITATION
TO SEVERE BURNS AND TISSUE D AMAGE TO EXPOSED AREAS OF BODY.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL: MOVE PERSON TO FRESH AIR. IF BRTHG STOPS ADMIN ARTF
RESP. GET MD IMMED. INGEST: GIVE LRG QTYS OF H*2O THEN SEVERAL
GLASSES OF MILK. DO NOT INDUCE VOMIT, GET MED ATTN @ ONCE.
EYE:FLUSH IMMED W/L RG AMTS OF H*2O FOR AT LEAST 15 MIN LIFTING
LIDS OCCASIONALLY. GET MED ATTN AT ONCE. SKIN: REMOVE CONTAM CLTHG
& IMMED WASH EXPOSED AREA W/H*2O FOR 15 MIN. GET MED ATTN IF
NECESSARY.

Fire Fighting

Flash Point:NONE
Extinguishing Media:AS REQUIRED BY SURROUNDING FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DILUTION WITH WATER MAY GENERATE LARGE
AMOUNT OF HEAT.

Accidental Release

Spill Release Procedures:KEEP WATER AWAY FROM SPILL, SCOOP AND SWEEP TO
RECOVER, FLUSH AREA WITH WATER AND NEUTRALIZE WITH DILUTE ACID.
Neutralizing Agent:DILUTE ACID.

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE, KEEP
CONTAINER CLOSED WHEN NOT IN USE. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED DUST MASK IF NECESSARY.
Ventilation:USE ADEQUATE VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS REQUIRED TO LIMIT SKIN CONTACT. EMERGENCY
EYEWASH AND DELUGE SHOWER .
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:B3
Solubility in Water:COMPLETE
Appearance and Odor:ODORLESS, WHITE POWDER BLEND.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND OXIDIZERS.
Stability Condition to Avoid:EXTREME TEMPERATURES.
Hazardous Decomposition Products:CO, CO*2, H*2.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL FEDERAL, STATE
AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.